Go Kart FRONTS Go Kart Off...

BRAND NEW FRONT PAIR of Off Road Rims & Tyres

These will bolt directly onto your existing race kart chassis 17mm stub axles.

This will provide approx 120mm additional diameter at the front and 100mm additional diameter at the rear compared to a normal senior race kart based on: Our off-road tyres are around 320-340mm in diameter depending on how much you inflate them.  Generally, on a standard senior-size race kart with dry-slick rims and slick tyres you would normally be running about 220mm at the front and 240mm diameter at the rear.  (Note, dry slicks are usually limited to a low inflation and this reduces ground clearance, so sometimes they may be even less).

FRONT

High Speed Low Friction Bearings Installed - 17mm ID - suit 17mm Stub Axles

Centre Offset (equal offset either side)

5" Wide

6" Diameter Rims

13" Diameter Tyres fitted - 13x5.00-6

Outer bearing (inside) to Outer bearing (outside) (length of stub required to fit) = 40mm

Steel rim centres.

KIT INCLUDES

2x WHEELS

2x 3x50 to 3x78mm PCD Adaptors

2x Front Wheel Hubs with 17mm id bearings fitted

All hardware required to connect them together

*PLEASE NOTE - The tyre size on these black wheels are the same specification as the silver wheels BUT THEY ARE LARGER IN DIAMETER by about an inch or so.  This is purely because of the brand of tyres used.  The tyres can be interchanged.

Designed for most brands of go karts.

New. 

Brand New