Home :: Clutches :: Race GE & GT Range :: Clutch CPR GT-RACE Series 219 Pitch 20 Tooth 19mm (3/4inch) bore WITH G-Drive 219P Chain & SPLIT 219P Sprocket

Clutch CPR GT-RACE Series 219 Pitch 20 Tooth 19mm (3/4inch) bore WITH G-Drive 219P Chain & SPLIT 219P Sprocket

Clutch CPR GT-RACE Series 219 Pitch 20 Tooth 19mm (3/4inch) bore WITH G-Drive 219P Chain & SPLIT 219P Sprocket

THIS KIT INCLUDES A G-DRIVE MASTER-LINKED CHAIN & SPLIT 219P SPROCKET

COMPLETE KIT INCLUDING CRANKSHAFT KEY!

CPR's new GT-RACE series selects our performance components to suit competitive racing go-karts for track competition purposes. Uncompromising quality at the most affordable price.

G-DRIVE 219P race kart Chains with joiners are designed to provide reliability and the ultimate convenience when running 219P on a 4-stroke engine and inboard transmission.  Just unclip the master joiner link and remove / reinstall!  SO EASY

Our CPR 219P Gold SPLIT Sprockets marry perfectly with G-DRIVE chains, offering unprecedented simplicity - no more bending and damaging sprockets or removing axles to change them!  Professionally cut and designed for easy installation without removal of the axle shaft - it's just a BREEZE!

Make no mistake though, CPR GT-RACE products are premium quality.

WHY ARE THEY SO CHEAP? Well we buy direct from the manufacturer in bulk, not via a local distributor and that means you SAVE HEAPS! If you're looking for an advantage on the track and are not interested in paying huge prices then try our GT-RACE range and join the growing community of affordably competitive racers today!.

 
219 Pitch RACE CPR GT Clutch suit 4-stroke and Torini Clubmaxx.
Suits Standard 19mm Drive Shaft (3/4") as used on most 6.5hp engines.
 
Includes 20T drive sprocket.
 
This is a FULLY ADJUSTABLE Race ready twin shoe clutch.  Engagment RPM can be adjusted with our NORAM GE spring range from 1820RPM through to 4320RPM.
 
Engagement speed can be set from Very Smooth Gradual engagement with high inertia starts through to Rapid engagement with low inertia starts.
 
Supplied with RED springs and Heavy Shoes for approx 2000RPM engagement.
 
A full range of springs is available in the GE springs section.
 
Lightweight shoes can also be purchased in the GE springs section.
 
Complete unit with Drum and Clutch.  Assembled ready-to-go.
 
Length of inner shaft ~59mm - requires approx 56mm long shaft.
 
Approx. diameter of body of clutch = 94mm
 
Read the engagement speed and rpm adjustement guide to select the correct springs and engagement settings here: http://cutpriceracing.com.au/phpbb3/viewtopic.php?f=14&t=258&p=538#p538

 

PACKAGE INCLUDES:

Includes clutch with drive sprocket teeth number as per title.

Includes Key to suit 3/4" output shaft (19.05mm)

CPR G-DRIVE Gold Master-Linked 219P race kart chain with joiner link

Split 219P GT-Gold Sprocket

 

DEFAULT UNIT SPECIFICATON:

If you do not change any of the shoe or spring choices, the default unit is fitted with light shoes and has an RPM engagement speed of approximately 2450rpm which is ideal for most engines used in racing environments.  This combination gives you a boost off the line, and less bogging down in the corners.

Engagement speed can be set from Very Smooth Gradual engagement with high inertia starts through to Rapid engagement with low inertia starts.

 

OPTIONS:

SHOE WEIGHT:  You can also choose your Shoe weight in the configuration wizard.

Heavy shoes are recommended for stock and mild tune engines, giving a better bite at lower rpm for better use of low-down torque.  Light shoes are recommended for heavily tuned engines where torque is produced much higher in the rev range.  This gives more slip down low to allow the engine to reach the high torque section of the power curve. 

SPRING TYPE:  Choose your Spring type in the configuration wizard.  

Listed springs show rpm engagement with heavy shoes (H####) and light shoes (L####).  Springs determine the RPM engagement speed based on the shoe weight.

 

LEARN HOW TO DISASSEMBLE, ASSEMBLE & SERVICE YOUR CLUTCH:

Visit our forum and read our guide here: 

http://cutpriceracing.com.au//phpbb3/viewtopic.php?f=14&t=850

 

New. 

 

NOT SURE HOW TO BUY THIS ITEM?  Click here to read our simple walk-through guide.

GTClutchServiceGuide

 

GTClutchChoiceGuide

Details
SKU CGTSC21920C
Base product price: $179.00
including GST 10%
: *
: *
: *
 

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.