Home :: Axles & Parts :: 40mm :: Complete Racing Mower 40mm Axle Kit 8mm Keyway Red with Weld-on Brackets and 4-Stud Wheel Adaptors

Complete Racing Mower 40mm Axle Kit 8mm Keyway Red with Weld-on Brackets and 4-Stud Wheel Adaptors

Complete Racing Mower 40mm Axle Kit 8mm Keyway Red with Weld-on Brackets and 4-Stud Wheel Adaptors

BRAND NEW RACING MOWER REAR END KIT

CPR Race Mower kits include everything you'll need to quickly, easily, and correctly install the rear drive axle assembly.  Includes weld-on brackets and hub adaptors to suit most 4-stud mower rear wheels.

Premium CPR Performance Billet Alloy Hubs designed for racing purposes.  CPR Precision Race Go Kart Components offer unbeatable value and dependable durability with a design and finish to impress even the fussiest drivers..

CPR Race Axle Assemblies have been crafted to suit high horsepower, high G-Force racing - off-road and on-road.  Our Racing Mower kits are designed to provide the ultimate strength with a highly robust 40mm hollow (thick sidewall) axle shaft, specifically suited to the rigors of high horsepower, high weight racing mower competition.  Comprised of hardened steel, our Racing Mower shafts are lighter and stronger than the current range of solid axles on the market.
 
Not only are CPR Race Axle Assemblies high quality, but they also represent outstanding value for money.  When you replace or add a CPR kit, you'll have access to replacement parts at unbeatable value into the future. 

INCLUDES Weld-on Brackets so that you can get your racing mower up and running quicker and easier!  Or use the included brackets to convert an existing assembly to our standard bearing hanger configuration.  Additional brackets, bearings and hangers can be purchased seperately for a 3-bearing setup.

INCLUDES 4-STUD PCD Adaptors to fit most common racing mower rear wheels.

 

COMPLETE 40mm AXLE ASSEMBLY.  EVERYTHING you need to bolt-on and go - including ALL the nuts and bolts WITH ANODISED COUNTERSUNK WASHERS! 

 

High Quality anodised parts.

Colour: As Pictured

 

INCLUDES:

1x 40mm Axle Shaft 

1x 40mm Anodised Brake Hub

1x Drilled Brake Disc 

1x 40mm Anodised Sprocket Carrier/Hub 

2x 40mm Low Friction Sealed Bearings 

2x 40mm Anodised Self-aligning bearing carriers

2x 40mm Anodised Wheel Hubs 

2x CPR Bearing Hanger Brackets 

2x 4x110mm PCD Hub Adaptors (Steel - High Strength)

 

ALSO INCLUDES the following nuts, bolts, and fixations:

4x Axle Keys cut to fit exact lengths of keyways 

3x Bolts, washers & 2x Square Head High Tensile bolts for Brake Hub

6x ANODISED Countersunk Washers, 6x Countersunk High Tensile bolts, 6x Washers, 6x Nyloc nuts, 2x High tensile bolts for Sprocket Carrier

6x ANODISED Countersunk Washers, 6x Countersunk High Tensile bolts, 6x Washers, 6x Nyloc nuts, 2x High tensile square head bolts and 2x nuts for Bearing Carriers.6x Studs, 6x Washers, 6x Nylocs, 2x High Tensile Square Head bolts for Wheel Hubs.

 

SPECIFICATIONS:

 

 
AXLE
Axle Diameter: 40mm
Axle wall thickness: 4.5mm
Axle Length: 1047mm (~1050mm)
Keyway width: 8mm
Keyway locations:  from end to end
 
A = 1047mm (~1050mm)
B = ~10mm
C = ~65mm (Keyway position from end of shaft ~10mm -> ~75mm)
D = ~192mm
E = ~65mm (Keyway position from end of shaft ~267mm -> ~332mm)
F =  ~296mm
G = ~130mm (Keyway position from end of shaft ~628mm -> ~758mm)
H = ~58mm
I =  ~111mm (Keyway position from end of shaft ~816mm -> ~927mm)
J = ~46mm
K = ~65mm ( ~973mm -> ~1038mm)
L = ~10mm
 
Please note from batch to batch the measurements above may be slightly different.

 

BRAKE DISC

Brake Disc Thickness @ 4.5mm

Brake Disc Diameter @ 190mm

 

BEARINGS

40mm low friction free-spin bearings
Twin grub screws & locating pins

 

BEARING CARRIERS

Self-Aligning Bearing Flange/Holder/Cradle complete with 40mm Low Friction Race Bearing installed.

Holes are set 78mm apart from each other and 45mm from the centre.

 

WHEEL HUBS

8mm Keyway

Length: 60mm

Studs, washers & nuts included - standard thread

 

WHEEL HUB ADAPTORS

Holes are set 50mm apart from each other and 29mm from the centre (Suit Standard Rear Wheels) and plate holes are 110mm centre to centre from opposite, or 78mm from each other (110mm x4 PCD)

Thickness 9.5mm with 1.5mm flange
 

SPROCKET HUB

8mm Keyway

Holes are set 67mm apart from each other and 67mm from the centre (Suit Standard 219 or 35 pitch Sprocket).

 

This quality part matches our other anodised items.

 

Designed for most brands of go karts.

 

New. 

 

SteeringGuide

Details
SKU AXMP40R
Regular price: $678.85
 
Price with FREE DELIVERY: $399.00
including GST 10%
Options
Quantity
: *
: *
: *
 
Bracket for Bearing Hanger Carrier suit AXCC408 Axle Kits
Bracket for Bearing Hanger Carrier suit AXCC408 Axle Kits
$24.90

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.