NEW MODEL! 

Fits engines smaller than GX240. Can be modified to fit larger engines, but this version is not designed for motors 9hp and larger - we recommend our TCCX versions for larger horsepower engines.

Supplied with 420P 10T.  Great for those of you with 'drift' karts which are difficult to convert to #35.

Not sure if a torque converter is right for you?  Read our run down on torque converters vs dry clutch here

Want to learn how to install a torque converter and find dimensions of our unit?  Have a look at our install guide here.

Now with FREE 420P Chain and 420P sprocket (only one size available - 44T)

420 Pitch Torque Converter suit 4-stroke.

Suits Standard 25.4mm Drive Shaft (1") (straight shaft) and ~6mm keyway.

Includes 420P 10T drive sprocket.

Complete unit with everything required to fit - includes belt, drives, mounting plate, sprocket and cover.

Rear 420P 44T sprocket and a chain included!  Sprocket fits readily available 6-bolt pcd go kart hub/carrier.

Expect approximately 2.7:1 initial reduction of your gear ratio upon take-off, then the torque converter will progressively move through to a final drive of approximately 0.90:1 (overdriven) at full speed.  This allows use of taller gearing on the rear without acceleration issues.

New.