BRAND NEW.

*NOTE FOR BEST RESULTS, WIND LEAD AROUND HIGH TENSION PLUG LEAD UP NEAR THE SPARK PLUG BUT NOT OVER THE THICK RUBBER OF THE PLUG CAP - MAKE SURE YOU CONNECT TO THE THINNER 'LEAD' SECTION CLOSEST TO THE CAP OF THE PLUG. 

Feature-rich TACHO at a budget-racer price.

NEW Front-Mounted Buttons RESETTABLE MAX RPM FUNCTION!  PLUS SERVICE REMINDERS! 

This is the latest model.  NOW WITH LARGE DISPLAY AND BACKLIGHT!

This model suits both 2 & 4 stroke karts.  Uses a simple and easy switch to adjust.  (For 4-stroke single cylinder such as GX200 use set to 1P2r)

Simple induction system - run the wire to your spark plug lead and place alongside - we recommend parallel to the spark plug wire just before the end-cap.  It's best to use a zip-tie/cable tie, but you can also use some tape.  While you can wrap the sensor wire around the spark plug lead, this will not be as accurate due to interference from coiling the sensor wire.

Adjust sensitivity and update smoothness easily.

Reset Hour-meter easily. 

COMPLETE  EVERYTHING you need to bolt-on and go - including ALL the screws. This is a dream price!

INCLUDES:

1x up to 20,000rpm TACHO with MAX-RPM Recall and Sensitivity/Display adjustment features

1x HOURMETER (hourmeter and tacho is one unit)

1x 1.4m sensor lead

1x Velcro Sticky Backed Tape (fully removable and re-mountable with velcro included)

1x Battery

SPECIFICATIONS:

OVERSPEED RPM ALERT

Replaceable Battery with battery level readout (CR2032)

Front Mounted adjustment buttons.  Access features and readouts on-the-go

LARGE 5 digit LCD screen

BACKLIGHT

Tacho with 1rpm resolution

Up to 20,000rpm readout

Hourmeter (trip/engine resettable - total hours not resettable)

SERVICE/REBUILD reminder at 0-200hrs (adjustable)

Auto switching Tacho/Hourmeter (Switches to hourmeter readout when engine switched off.  Switches to tacho readout when engine on)

Compact 65mm (W) x 35mm (H) x17mm (D)

waterproof level IP65

Designed for go karts.

DOWNLOAD THE MANUAL

New. 

Brand New