BRAND NEW.

Key - suits GX200 and GX160 - Advances ignition timing by 6 degrees on a GX200

or by 8 degrees on a GX390

Recommended for use in GX200s on Pump Fuel and 160s on with stock flywheels

Installation:

Remove Flywheel.  Looking at flywheel side of the motor, install timing key with the notched part to the left.  Install flywheel and rotate as much as possible clockwise.  After flywheel in installed, use torch and look into keyslot, making sure flywheel is rotated/installed as shown.  Install and tighten flywheel nut.

New. 

Brand New