COMPLETE 3/4" (19.05mm) 420 5:3 Reduction Jackshaft kit.

HAVE YOU GOT BIG WHEELS?

If your vehicle has wheels in excess of 14 inches (350+mm) then even with a Torque Converter you still may be having problems with your gearing being too tall.

DO YOU HAVE:

- CONSTANT BURNT OUT OR SUPER-HOT CLUTCHES?

- BROKEN TORQUE CONVERTER BELTS?

- LABORING ENGINE, NEVER REALLY GETTING UP TO SPEED?

- STRETCHED OR BROKEN CHAINS?

- BENT OR WARPED SPROCKETS?

Then you need to shorten your gear ratio - this kit will do exactly that in one, easy to buy kit!

Includes everything required to set up a jackshaft to do a 5:3 reduction on a standard 420P drive transmission.  Drive it with the 420P chain in the kit, from a clutch or torque converter.

1x CPR 420 pitch chain with removable link

1x 12T 420 19.05mm 3/4" Jackshaft Sprocket with Grub Screws

1x 20T 420 19.05mm 3/4" Jackshaft Sprocket with Grub Screws

1x 3/4" Jackshaft (300mm long)

1x Key to suit (40mm long)

2x Bearings

2x Pillow Block housings (Holes are set 95mm apart from each other)

New. 

BRAND NEW