Home :: GUIDE - GX200 & Clone List of Gaskets with Store Links

GUIDE - GX200 & Clone List of Gaskets with Store Links

Are you searching for all the gaskets required to rebuild the ENCL65 or ENCLST1 CPR 196cc or a Honda Clone GX200 engine?

It's a question we get asked all the time - which gaskets do I need to rebuild my engine? So that you don't buy too many, or too few gaskets and seals we've compiled this simple to follow list to ensure you get all the parts you need before you start pulling your engine down.

CRANK CASE

For the bottom end, you will need the gasket for the side cover. If it is one of our CPR (Lifan) engines and has 4 bolts on the rocker cover you need this one:

Crank Case Gasket CPR Performance Suit 4-Bolt Head Type Honda Clone ENCLST1

SKU: GCCB02

And if it has 5 bolts on the rocker cover:

Crank Case Gasket CPR Performance Suit 5-Bolt Head Type Honda Clone ENCL65

SKU: GCCB01

Sidecover gaskets are all pretty much the same, just slight differences from model to model. If your engine is not one of our engines then the 4-bolt tappet cover one is the best option.

CRANKSHAFT

Typically you'll need two of the crank seals (one for either end):

Crank Case Shaft oil Seal CPR Performance Suit GX200/160 Honda and Clone

SKU: ECSGX2

HEAD

When replacing the head gasket, you generally have two main options - stock fibre-style gasket with steel ring (best for very high compression engines which blow head gaskets easily):

Head Gasket Stock Clone Suit Honda Clone GX200 ENCL65

SKU: GHLC01

Or Increased compression viton coated steel 0.10mm thin gasket (this is a great way to increase compression slightly on a completely stock engine, providing a small but valuable power improvement). These can also be used on modified engines assuming the engine has been not been specifically built to run a stock gasket.

Head Gasket CPR Performance Increased Compression Suit Honda Clone GX200 ENCL65

SKU: GHLA01