THIS KIT ALLOWS YOU TO CONFIGURE ANY COLOUR ANODISED AXLE PART FOR EACH COMPONENT.  YOU CAN CHOOSE ALL THE SAME COLOUR, OR DIFFERENT COLOURS FOR EACH PART YOU LIKE.

IF THE COLOUR YOU WANT FOR A PARTICULAR PART IS OUT OF STOCK, YOU WILL NOT BE ABLE TO ADD IT.  

Sometimes we can be out of stock of a specific colour in a particular part (for example, we may be out of red wheel hubs) which will cause the entire red kit to become unavailable.  Using this configurable kit, in the case that all the other components are available in the colour you would like, you can configure the kit for example all red, but with silver or black wheel hubs.

BRAND NEW RACING MOWER REAR END KIT

CPR Race Mower kits include everything you'll need to quickly, easily, and correctly install the rear drive axle assembly.  Includes weld-on brackets and hub adapters to suit most 4-stud mower rear wheels.

*NOTE: In some states, the rule for Mower Racing specify a shorter axle shaft than that which is contained in this kit. It is accepted practice to cut down the shaft included in this kit and either mill in new keyways to suit, or use our "Peg Key" system (see related products at the bottom of this listing) to install keys wherever they are required.

Premium CPR Performance Billet Alloy Hubs designed for racing purposes.  CPR Precision Race Go Kart Components offer unbeatable value and dependable durability with a design and finish to impress even the fussiest drivers..

INCLUDES Weld-on Brackets so that you can get your racing mower up and running quicker and easier!  Or use the included brackets to convert an existing assembly to our standard bearing hanger configuration.  Additional brackets, bearings and hangers can be purchased seperately for a 3-bearing setup.

INCLUDES 4-STUD PCD Adapters to fit most common racing mower rear wheels.

COMPLETE 40mm AXLE ASSEMBLY.  EVERYTHING you need to bolt-on and go - including ALL the nuts and bolts WITH ANODISED COUNTERSUNK WASHERS! 

High Quality anodised parts.

Colour: As Pictured

INCLUDES:

1x 40mm Axle Shaft 

1x 40mm Anodised Brake Hub

1x Drilled Brake Disc 

1x 40mm Anodised Sprocket Carrier/Hub 

2x 40mm Low Friction Sealed Bearings 

2x 40mm Anodised Self-aligning bearing carriers

2x 40mm Anodised Wheel Hubs 

2x CPR Bearing Hanger Brackets 

2x 4x110mm PCD Hub Adapters (Steel - High Strength)

ALSO INCLUDES the following nuts, bolts, and fixations:

4x Axle Keys cut to fit exact lengths of keyways 

3x Bolts, washers & 2x Square Head High Tensile bolts for Brake Hub

6x ANODISED Countersunk Washers, 6x Countersunk High Tensile bolts, 6x Washers, 6x Nyloc nuts, 2x High tensile bolts for Sprocket Carrier

6x ANODISED Countersunk Washers, 6x Countersunk High Tensile bolts, 6x Washers, 6x Nyloc nuts, 2x High tensile square head bolts and 2x nuts for Bearing Carriers.6x Studs, 6x Washers, 6x Nylocs, 2x High Tensile Square Head bolts for Wheel Hubs.

SPECIFICATIONS:

BRAKE DISC

Brake Disc Thickness @ 4.5mm

Brake Disc Diameter @ 190mm

BEARINGS

40mm low friction free-spin bearings
Twin grub screws & locating pins

BEARING CARRIERS

Self-Aligning Bearing Flange/Holder/Cradle complete with 40mm Low Friction Race Bearing installed.

Holes are set 78mm apart from each other and 45mm from the centre.

WHEEL HUBS

8mm Keyway

Length: 60mm

Studs, washers & nuts included - standard thread

WHEEL HUB ADAPTERS

Holes are set 50mm apart from each other and 29mm from the centre (Suit Standard Rear Wheels) and plate holes are 110mm centre to centre from opposite, or 78mm from each other (110mm x4 PCD)

Thickness 9.5mm with 1.5mm flange
 

SPROCKET HUB

8mm Keyway

Holes are set 67mm apart from each other and 67mm from the centre (Suit Standard 219 or 35 pitch Sprocket).

This quality part matches our other anodised items.

Designed for most brands of go karts.

New. 

 Brand New