BRAND NEW FULL SET of Off Road Rims & Tyres (2x Front + 2x Rear)

These will bolt directly onto your existing race kart chassis 17mm stub axles.

This will provide approx 120mm additional diameter at the front and 100mm additional diameter at the rear compared to a normal senior race kart based on: Our off-road tyres are around 320-340mm in diameter depending on how much you inflate them. Generally, on a standard senior-size race kart with dry-slick rims and slick tyres you would normally be running about 220mm at the front and 240mm diameter at the rear. (Note, dry slicks are usually limited to a low inflation and this reduces ground clearance, so sometimes they may be even less).

FRONT

High Speed Low Friction Bearings Installed - 17mm ID - suit 17mm Stub Axles

Centre Offset (equal offset either side)

5" Wide

6" Diameter Rims

13" Diameter Tyres fitted - 13x5.00-6

Outer bearing (inside) to Outer bearing (outside) (length of stub required to fit) = 40mm

Steel rim centres.

REAR

5" Wide

6" Diameter RIms

Rim Holes are 78mm from each other centre-to-centre (3x78mm PCD)

Adaptor Holes are 3x50 PCD to suit standard race go kart hubs

13" Diameter Tyres fitted - 13x5.00-6

KIT INCLUDES

4x WHEELS

4x 3x50 to 3x78mm PCD Adaptors

2x Front Wheel Hubs with 17mm id bearings fitted

All hardware required to connect them together 

*PLEASE NOTE: The tyres on these rims are larger than the ones on the silver front rims.  The specification is the same, but the brand has a different sidewall height which makes these tyres about 1 inch larger in diameter. 

Designed for most brands of go karts.

New. 

Brand New