Click the pictures above to enlarge.
***THIS MODEL SUPPLIED WITH 85mm LONG REAR WHEEL HUBS***
BRAND NEW.
This is the new model. It suits 2 stroke and 4 stroke karts.
COMPLETE 40mm AXLE ASSEMBLY. EVERYTHING you need to bolt-on and go - including ALL the nuts and bolts WITH ANODISED COUNTERSUNK WASHERS! This is a dream price!
Total Value - $676 (see prices below)
High Quality anodised parts.
Colour: As Pictured
We have decided to make life easy for you and help you out with comparing the prices too. In the brackets ( ) you'll find comparable prices on the net including postage so you can see how much you'll save by buying the whole lot from us. Plus, I bet there's some parts in there you won't get anywhere else!
INCLUDES:
1x 40mm Axle Shaft ($120)
1x 40mm Anodised Brake Hub ($80)
1x Drilled Brake Disc ($120)
1x 40mm Anodised Sprocket Carrier/Hub ($55)
2x 40mm Low Friction Sealed Bearings ($50)
2x 40mm Anodised Self-aligning bearing carriers ($80)
2x 40mm Anodised Wheel Hubs ($85)
PLUS
ALSO INCLUDES the following nuts, bolts, and fixations:
4x Axle Keys cut to fit exact lengths of keyways ($10)
3x Bolts, washers & 2x Square Head High Tensile bolts for Brake Hub ($8)
6x ANODISED Countersunk Washers, 6x Countersunk High Tensile bolts, 6x Washers, 6x Nyloc nuts, 2x High tensile bolts for Sprocket Carrier ($24)
6x ANODISED Countersunk Washers, 6x Countersunk High Tensile bolts, 6x Washers, 6x Nyloc nuts, 2x High tensile square head bolts and 2x nuts for Bearing Carriers. ($28)
6x Studs, 6x Washers, 6x Nylocs, 2x High Tensile Square Head bolts for Wheel Hubs. ($16)
SPECIFICATIONS:
AXLE
Axle Diameter: 40mm
Axle wall thickness: 4.5mm
Axle Length: 1050mm
Keyway width: 8mm
Keyway locations: from end to end:
@ 10mm->75mm
@ 120mm -> 185mm
@ 350mm->400mm
@ 740mm->790mm
@ 975mm -> 1040mm
BRAKE DISC
Brake Disc Thickness @ 4.5mm
Brake Disc Diameter @ 190mm
BEARINGS
40mm low friction free-spin bearings
Twin grub screws & locating pins
BEARING CARRIERS
Self-Aligning Bearing Flange/Holder/Cradle complete with 40mm Low Friction Race Bearing installed.
Holes are set 78mm apart from each other and 45mm from the centre.
WHEEL HUBS
8mm Keyway
Length: 85mm
Studs, washers & nuts included - standard thread
SPROCKET HUB
8mm Keyway
Holes are set 67mm apart from each other and 67mm from the centre (Suit Standard 219 or 35 pitch Sprocket).
This quality part matches our other anodised items.
Designed for most brands of go karts.
New.
|