Home :: CPR KARTBEAT NEWS

CPR KARTBEAT NEWS

CPR KARTBEAT NEWS

Get our Newsletter by Email



WEEK 49 2019 CPR KART-BEAT UPDATE

PaulsFace Hi *|FNAME|*!

Welcome to our CPR Kart-beat update.

We're all either sweating, or freezing around Australia right now with some very unusual weather events dominating both the news, and some of our personal day-to-day worries.  Our thoughts go out to all of those people affected by the bush fires around the country.

With Christmas and New Year right around the corner, we thought you'd like to know our opening and shipping schedule - we've included it below - scroll down to find out when you can expect your order to ship over the holiday period.

THIS WEEK'S GUIDE:  This week we run you through the straight-forward process of installing our popular CPR Race Brake hydraulic system on a CPR kart.

FRIDAY NIGHT FUN:  This week we get a birds eye perspective of the NQ250 racing at pioneer park in QLD.

SHIPPING INTERRUPTIONS & HOLIDAYS- Our phone hours have changed - due to a staff shortage we are now offering only email support on Fridays - shipping will be normal on fridays though.  Scroll down to find out what's happening.

If you prefer not to receive these emails, click the unsubscribe link at the top or bottom of this email - and if you want to keep receiving our emails then you don't need to do anything at all! Just sit back and check out the fun each week!

Oh, and don't forget to jump online and check out our store to make sure you've got everything you need to race this coming weekend!





SPECIAL OFFER!!

BLUE SEAT WASHERS


We're overstocked!



200pcs price slashed!


$1.50each


(normally $2.35each)


Click the picture above to order yours now before they are all gone!




DriverProfileIconPHONE HOURS CHANGE (temporary)

WE'RE OPEN FRIDAYS (with email support)
No phone support Fridays temporarily.

We have some staff on leave, so our staff level is temporarily reduced.  We've decided to concentrate on ensuring we get your orders out super-fast like usual, so if you're buying from the store you'll notice absolutely nothing at all.  However, in order to do this we've had to cut back on phone support on Fridays - if you need help, we're concentrating on email - it's fast, you'll generally get a reply within 15 minutes as we're keeping a close eye on it on Fridays.  So if you've got an enquiry, email us and we'll help you out.  If you have an order on Fridays, you can place your order in our safe and secure web store and we'll send it the same day as long as it's paid by 2pm (just like normal).

Learn more about our shipping times by clicking the picture or CLICKING HERE



CHRISTMAS & NEW YEAR TRADING HOURS

(All Green & Blue days are shipping days)

CHRISTMAS & NEW YEAR OPENING HOURS

WE ARE SHIPPING NORMALLY ON ALL GREEN AND BLUE DAYS

Thank you to all of our awesome clients for a year we will remember!  This year, we helped some fantastic people achieve their dreams, building projects and race karts, as well as some of our favourite racers placing highly in their classes!  Well done everyone and thank you again!

LAST SHIPPING DAY BEFORE XMAS - MONDAY 23rd DECEMBER 2019
All orders ship if paid before 2PM

This year we'll be trading right up until the Monday before Christmas.  Orders placed before 2pm (Brisbane Time) Monday 23rd December will ship before Christmas - local and 1 day services will arrive well in time for Christmas Day, and express services will also arrive - so if you're getting in at the last minute be sure to select "Express Shipping" to ensure you get your goods in time for fun over your break.

WE'RE SHIPPING ORDERS ON 30th DECEMBER 2019

AND 2nd JANUARY 2020

If you don't manage to get your order in by 2pm Monday 23rd December, that's ok, we'll have a skeleton staff on the 30th December 2019 to ship any orders placed after 2pm Monday 23rd December and before 2pm Monday 30th December.  We will also be shipping on Thursday 2nd January 2020 any orders that aren't in by 2pm Monday 30th December.  

NO PHONE SUPPORT FROM 20th DECEMBER 2019 UNTIL 6 JANUARY 2020 - WE DO HAVE FULL EMAIL SUPPORT ON SHIPPING DAYS!

We won't be offering phone support after Thursday 19th December until we return on 6th January but email will be attended to between 9am and 3.30pm on the days we're shipping in between - that is, we will be offering email support only on 20, 23, 30 December 2019 and 2 January 2020 (we might not be able to promise our usual 1hr response on that Thursday, but we'll certainly try our hardest!).

THE WHOLE TEAM IS BACK ON BOARD IN THE NEW YEAR ON MONDAY 6th JANUARY 2020

We'll help you welcome in the new year and ship out all your gear as normal on Monday 6th January 2020.  We'll also be open normally with phone support - we can't wait to talk to you then!

We wish all of our clients and future friends a wonderful Christmas and New Year and hope you all get loads of work done on your karts, and enjoy the festivities with your special ones!


 





InStock.jpg

BACK IN STOCK

This week we've had our new shipment arrive, check out what's back in stock!





 GT-GOLD 219P 112L CHAINS


BLACK SEAT WASHERS






NewProduct.jpg

NEW PRODUCTS

This week we've got some awesome new products to show you.
They're sure to be of interest - we know because you've asked us for them!
So scroll through and enjoy
..And let us help you Drive Faster!

NEW 72mm RING SETS


NEW Wider Range of Gold Tie Rods



NEW
Budget Tyre Sets $159/set!





CLICK ANY OF THE PICTURES ABOVE
TO FIND IT ON OUR STORE








THIS WEEK'S DIY GUIDE





Hydraulic Brakes

1 Piece assembled (Master, 2x Lines, Calliper).

*FIT KIT Hydraulic Brake Fitting Kit

CALLIPER INSTALLATION

a. Fit the calliper to the vertical rear calliper bracket on the left side of the kart beside the outer bearing axle bracket. Slide the calliper over the disc.

b. Adjust the disc by loosening the hub locking bolts and sliding the disc sideways until it is central within the calliper.

c. Tighten the hub locking nuts.

d. Using the two M8x20mm bolts, push each bolt through the bracket, then through an M8 washer and screw into the calliper (see below). Tighten.

 

MASTER UNIT INSTALLATION

e. Run the master through the opening between the seat brackets and the chassis rail.

f. Fix the master to the outer side of the bracket beside the seat using the two M8x50mm Square head bolts.

g. Push the bolts through the master from the outside, then through the master bracket, then secure using the two M8 Nyloc nuts. Tighten. h. Fix the line to the seat uprights with the three zip ties provided. *NOTE, the new model kart does not

Well Done!  You've completed the Hydraulic Brake installation!





FRIDAY NIGHT FUN

Ryan's Popping & Crackling CPR 10hp engine upgrade footage


Every Friday we'll be posting one of our fantastic customer DIY projects. These have been designed and built using quality CPR kart parts by guys and girls just like you! There's some really exciting stuff to check out, so keep an eye out each Friday for our next instalment!

When Ryan called to re-power his buggy he was thrilled to learn that he could improve the torque on his machine by upgrading to one of our rock-solid CPR 10hp engines! 

With a little bit of adjustment and a bit of help from a friend, Ryan successfully converted his twin seat buggy with the option to restrict the power and increase as skill is acquired by the young drivers!

He couldn't be more happy!

Just have a listen to the video - the sound is fantastic!  Pops and crackles galore!

Keep up to date with the project thread online in our store here:
CLICK HERE TO SEE RYAN'S THREAD

LET US SHOW THE WORLD YOUR PROJECT!

Have you got a project you've completed using some CPR parts that you'd like to show the CPR Kart Parts community?

Send us pics or video of your project and we'll try to feature it in the coming weeks!

FB Inbox us your photos/video or

Email your photos/video: [email protected]

or Text your photos/video to 0425 899 222












<!-------------------------------------------------------------------------->

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
HAVE YOU GOT SOMETHING YOU'D LIKE TO SHOW THE WORLD?

Project

 

Have you got a project you've completed using some CPR parts that you'd like to show the CPR Kart Parts community?

Email your project to [email protected]

along with a quick write-up of what you've done and why and we'll try to feature it in our future newsletters.

 

And remember, we're here to help you get out there racing!

You can always be sure your items will leave the same day you order as long as you've made payment by 2pm that day. Sure, it's a big claim, but I know shopping online is all about getting it before the weekend race day, and that's why I'm absolutely dedicated to getting our gear out the same day you order. I believe so strongly that this is a critical component of our business that I've devoted the last two hours of the day to ensuring just that. Don't be surprised if I can't get to the phone during these times as we're probably flat out! Just leave me a message and I'll call you back asap.

I know if you've bought from us before, you've had a great experience. Nothing's changed with our focus - we still want to help the average Australian race, but we're expanding our range every day so I'd love for you to check out our latest website updates and see if we can help you again, today. Go on, visit our store at www.CutPriceRacing.com.au - I mean, surely you've got a couple of minutes for fun?

CPR_web_logo.jpg

Cheers,

Paul Jones
Managing Director