Store Home   Forum Home   Help & Contact Info   Bank & Payment Details   DIY Go Kart Plans


EMTA02 EMTA03 Engine Mount Billet Adjustable on CHBC01

EMTA02 EMTA03 Engine Mount Billet Adjustable on CHBC01

Postby adevoy » Sat Dec 12, 2015 3:13 am

EMTA02 G13 Engine Mount Billet Fully Adjustable
I recently bought this engine mount to avoid the hassles of adjusting chain tension and engine position. This has made things so much easier and quicker to achieve minor adjustments.
http://www.cutpriceracing.com.au/store/ ... -4-Stroke/
EMTA02_1.jpg
EMTA02_1.jpg (21.04 KiB) Viewed 13035 times


The only issue is that I had to cut and grind the existing plate off the frame for the new mount to be positioned. This was only 30 mins work but will save me hours in the long run and a lot of frustration!
See the images below to see the before and after and process.

EMTA02_2.jpg
EMTA02_2.jpg (78.92 KiB) Viewed 13035 times


Below is the frame with the engine mounting plate removed. This can be done with a grinder with cutting wheel or an oxy-acetylene torch.
EMTA02_3.jpg
EMTA02_3.jpg (77.03 KiB) Viewed 13035 times


This image below shows the new mount installed.
EMTA02_4.jpg
EMTA02_4.jpg (70.85 KiB) Viewed 13034 times


(Below) Another view from the rear.
EMTA02_5.jpg
EMTA02_5.jpg (54.02 KiB) Viewed 13034 times


(Below) Another view from the side.
EMTA02_6.jpg
EMTA02_6.jpg (57.56 KiB) Viewed 13034 times


(Below) Another view from the front.
EMTA02_7.jpg
EMTA02_7.jpg (62.22 KiB) Viewed 13034 times


(Below) Another view from underneath.
EMTA02_8.jpg
EMTA02_8.jpg (57 KiB) Viewed 13034 times


I could not recommend this product more highly!
Thanks Paul for all your advice and support.
Regards
Andrew
adevoy
 
Posts: 2
Joined: Sat May 17, 2014 3:13 am

Return to Installation Manuals for CPR Products

Who is online

Users browsing this forum: No registered users and 2 guests

cron